Monday, December 11, 2017

how to fix error U051,E05 and 1401 in canon MX Series Printers

Description:

The print head is not installed or has not been properly installed.

Resolution:

Resolving this error requires the assistance of a Canon authorised service facilit.

U051


Clearing the Canon “Check Ink” 1401, 1687 and 1485 Error Messages

When your Canon Pixma printer is having trouble recognising one or more of the cartridges installed it will present you with the Check Ink 1401, 1687 or 1485 error message. The official Canon explanations for these codes are “The FINE cartridge is not installed” for 1401, “The FINE cartridge is not installed properly” for 1687 and “Appropriate ink cartridge is not installed” for the 1485 message. Although several of these messages refer to Canon FINE cartridges this does not mean that you have an new genuine Canon cartridge installed and can still use your printer with the correct refilled or remanufactured ink cartridge. More information on Canon FINE cartridges can be found here.

Is there any way to fix the 1401, 1687 and 1485 support codes?

Depending upon the message you are receiving the cause will vary. “The FINE cartridge is not installed” or “The FINE cartridge is not installed properly” indicate something is breaking communication between one or more of the installed cartridges and your printer, and “Appropriate ink cartridge is not installed” indicates a cartridge installed in the incorrect position within your printer. To resolve any of these Canon error messages please follow the steps below until the message disappears.

·        Ensure both a black and colour cartridge are installed. Open up your printer and remove both cartridges to ensure the one of each cartridge is installed. Your printer requires that both a black and colour cartridge is installed in order to print, even if you only wish to print in black/colour. You can find our more about why this is necessary here.

·        Check the cartridges have the correctcodes. Although many Canon cartridges are similar in appearance your printer requires specific cartridges to be installed in order to recognise them and print with them. The cartridge should be carrying codes machine or at least similar to PG-540, PG-540XL, PG-545 or PG-545XL for the black and CL-541, CL-541XL,  CL-546 or CL-546XL for the colour cartridge. Which codes are correct for your specific printer will depend upon the model of your printer. If you have any doubts either check your printers paperwork or give your model number a quick Google.

·        Make sure the contacts are clean. The only thing your printer uses to communicate with your cartridge is an unassuming set of metallic contacts you can find on a strip to the front of the cartridge. If these contacts have become dirty or otherwise damaged from use then your printer will be unable to recognise and use the cartridge. I recommend wiping down the cartridge firmly with a piece of kitchen tissue or any other non-fibrous tissue to remove any dirt, oxidisation or otherwise invisible natural oils that may be obscuring the contacts. If you notice anything particularly stubborn that may be causing problems, you may wish to clean then again using an alcohol based cleaning solution.

 ·        Replace the defective ink cartridge. If your printer still cannot recognise the cartridge then sadly it is defective and will need to be replaced. If you have another cartridge to hand that you know to have worked previously it may be worth installing this one again. Otherwise I would advise installing a unused replacement cartridge (preferably a Canon original).
·        Clean the contacts inside the printer. If the error remains it may be that the cause of the problem is the contacts within your printer are dirty or damaged much the cartridge contacts we mentioned earlier. If you take the problem cartridge out of your printer and shine a light inside, you should see a series of contacts in roughly the same formation as those we have examined on the cartridge. These contacts can be cleaned in the same way that you cleaned the cartridge contacts, but be careful not to leave scraps of tissue on the contacts as they are sometimes pointed. With this done just reinstall the cartridge to see if the error disappears.

I hope this has helped, if however your Canon Pixma printer is still presenting you with the Check Ink 1401, 1687 or 1485 error message then it may be that the you have a more serious problem with your printer electronically. Sadly the troubleshooting above is not a guaranteed fix and in some cases intervention by Canon or a printer technician may be needed. If however your printer is still under warranty you should be able to get it fixed free of charge.

If the above solution has not resolved your error, please contact Canon authorised service facilit


How to Fix Error 1203 in Canon MX Series Printers.



Error Code 1203

Description

The cover has been opened while printing is in progress.

Action
1.      If paper is left inside the machine, remove the paper slowly with both hands and close the cover.
2.      Press the machine's [Black]or [Colour] button to dismiss the error.
3.      The machine will eject the blank paper and resume printing from the next piece of paper.
4.      The machine will not reprint the page that was printing when the cover was opened. Try printing again.

NOTE - Do not open or close the cover while printing is in progress, as this can damage the machine.
If the above solution has not resolved your error, please contact Canon authorised service facilit

How to Fix Error 1250/E17 in Canon MX Series Printers

1250/E17- Orange light blinking 3 times


Description:

The front door is closed.

Resolution:

1.      Open the front door to allow prints to exit.

Note - This error is detected at the start of printing or during printing.
If the above solution has not resolved your error, please contact +1-855-517-2433

How to Fix Error 1830 *1 in Canon MX Sereis Printers



1830 *1 - Orange light blinking 6 times

Description:

A print time-out has occurred in the CD/DVD print operation.

Resolution:

1.      Press the [Resume/Cancel] button on the device to clear the error and to retry the print process.
2.      Check that the CD/DVD is inserted correctly in the CD/DVD tray.
Canon authorised service facility. please contact Canon authorised service 855-517-2433. 

                                                Or 

Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

Tuesday, October 24, 2017

How to fix error 6C10 on Canon Printers Call Us Toll Free : +1-855-517-2433

How to fix error 6C10 on Canon Printers


This error appears on these printers: MP110, MP540, MP630, MP620, MP640, IP3600... and others...


Solution 1:

•    Move the printhead to the center.
•    Disconnect the printer and check on the right.

Solution 2:

•    Do a reset of the printer:
•    Power on
•    Hold down the "Resume" button .

Solution 3:

•    Power off the printer.
•    Open the door.
•    Power on.
•    When the cartridge is in the center, close the door.

Read More…


If the above solution has not resolved your error, Please Contact To  Authorised Service For Canon Printers | Call Now +1-855-517-2433


Call Us +1-855-517-2433 (Toll Free)

How To Solve Error 6000 Or P03 On Canon Printers

Error 6000 or P03 on Canon printers



That is a line feed error.


Solution 1:


•    Verify that the paper tray is correctly set.
•    If any object is placed in front of the machine.


Solution 2:


•    Search for any small .


Solution 3:


•    Power off the printer.

•    Power on.


Solution 4:


one of these parts could be faulty:


•    Timing sensor unit QM2-2683


•    Timing slit disk film QC1-6229


•    Feed roller ass'y QL2-0925


Read More…


If the above solution has not resolved your error, Please Contact To  Authorised Service For Canon Printers | Call Now +1-855-517-2433


Call Us +1-855-517-2433 (Toll Free)


How To Solve Error Code 6A80 On Canon Printers

Solution 1:

•    Switch the printer OFF
•    Press buttons.
•    Keep pressing.
•    Release the On/Off button.
•    After a few seconds.


Solution 2 :


•    I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion.

•    One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick.

•    I removed these pads and the printer returned to normal

Read More…


If the above solution has not resolved your error, Please Contact To  Authorised Service For Canon Printers | Call Now +1-855-517-2433


Call Us +1-855-517-2433 (Toll Free)